Inspection and Cleaning of the External A/C Condenser
P4 MM 83.03.002 (a); 5th Generation Cascadia MM
The BPHS A/C condenser is located on the backwall of the sleeper. Inspect the condenser as follows.
- Check for debris in the condenser housing.
- If needed, remove the condenser cover fasteners, then remove the cover. See Fig. or Fig. .
- Clean out any debris in the module.
- Install the cover.
Note: If the condenser core has a build-up of fine
debris, an A/C core cleaner, approved for copper and aluminum cores,
and a low pressure stream of water can be used to clean it.
Note:

