Public Technical Literature
Language
English
français
Español
italiano
Deutsche
português
русский — Russian
日本語 — Japanese
中文 — Chinese
English
français
Español
italiano
Deutsche
português
русский — Russian
日本語 — Japanese
中文 — Chinese
DD Platform Heavy Duty EuroIV Operators Manual
Chapter 1:
Forward
1.1:
Introduction
1.2:
Non-Genuine and Rebuilt Component Quality Alert
1.3:
Personnel Requirements
1.4:
Engine Conversions and Modifications
Chapter 4:
Engine Identification
4.1:
Engine Components - DD Platform
4.2:
Engine Model and Serial Number Designation
Chapter 5:
Operating Instructions for Starting the Engine
5.1:
First Time Start Preparations
5.1.1:
System Checks
5.1.1.1:
Checking the Cooling System
5.1.1.2:
Lubrication System Checks
5.1.1.2.1:
Pre-Lubricating the Engine
5.1.1.2.2:
Checking and Monitoring the Oil Level
5.1.1.2.3:
After an Extended Storage
5.1.1.3:
Fuel System Checks
5.1.1.3.1:
Adding Fuel
5.1.1.3.2:
Priming the Fuel System
5.1.1.4:
Checking Other Engine Parts
5.1.2:
Starting the Engine for the First Time
5.1.3:
Starting the Engine
5.1.4:
Running the Engine
5.1.4.1:
Checking the Oil Pressure
5.1.4.2:
Warming Up the Engine
5.1.4.3:
Inspection During Idling
5.1.4.4:
Checking the Transmission
5.1.4.5:
Checking for Fluid Leaks
5.1.4.6:
Checking the Crankcase
5.1.4.7:
Checking the Turbocharger
5.1.4.8:
Checking the Axial Power Turbine
5.1.4.9:
Avoid Unnecessary Idling
5.1.5:
Stopping the Engine
5.1.6:
Emergency Jump Starting
5.1.7:
Routine Engine Start
5.1.7.1:
Routinely Starting the Engine
5.1.7.2:
Checking the Coolant Level (Cold Check)
5.1.7.3:
Checking the Coolant Level (Hot Check)
5.1.8:
Monitoring the Engine Operation
5.1.8.1:
Monitoring the Battery Charging System
5.1.8.2:
Monitoring the Oil Pressure
5.1.8.3:
Excessive Idling
5.1.9:
Changing the Idle Speed
5.1.10:
Shutting Down the Engine after High Load Operation
5.1.11:
Emergency Running Mode
5.1.12:
Stop Engine Override Option
5.1.12.1:
Momentary Override
5.1.13:
Cold Weather Operation
5.1.13.1:
Winter Fronts
Chapter 6:
Detroit Diesel Electronic Controls (DDEC) System
6.1:
DDEC VI System
6.1.1:
Motor Control Module Description
6.1.2:
Common Powertrain Controller
6.2:
Detroit Diesel Electronic Control System Operation
6.2.1:
Stop Engine Override Switch
6.2.2:
Immediate Speed Reduction
6.2.3:
Red Stop Lamp
6.2.4:
Diagnostic Tool
6.3:
Detroit Diesel Electronic Control System Features
6.3.1:
Data Recording Capability
6.3.2:
Engine Brake
6.3.3:
Engine Protection
6.3.4:
Idle Shutdown Timer
6.4:
Accelerating the Vehicle
6.5:
Cruise Control
6.6:
Engine Brake and Cruise Control
6.7:
DD Platform Shifting
6.8:
Idling
Chapter 9:
Preventive Maintenance Intervals
9.1:
Preventive Maintenance Intervals
9.2:
Preventive Maintenance Tables
11.1.9:
Coolant Selections and Maintenance
11.1.9.1:
Coolant Selections and Maintenance
11.1.10:
Coolant Fill Options
11.1.10.1:
Coolant Fill Options
11.1.11:
Coolants for Detroit™ Engines
11.1.11.1:
Coolants for Detroit Engines
11.1.11.2:
Coolants NOT Permitted
11.1.11.3:
Non-Formulated Additives NOT Permitted
11.1.12:
Maintenance
11.1.12.1:
Maintenance
11.1.12.2:
Topping Off Coolant
11.1.12.3:
Coolant Maintenance Intervals
11.1.12.3.1:
Silicated Organic Acid Technology (Si-OAT) Coolant Maintenance Intervals
11.1.12.4:
Silicated Organic Acid Technology (Si-OAT) Coolant Additive Maintenance Procedures
11.1.12.5:
Standard Life Coolant Additive Maintenance Procedures
11.1.12.5.1:
Coolant Test Procedure
11.1.12.5.2:
Supplemental Coolant Additives (SCA)
11.1.13:
Appendix A - Definitions
11.1.13.1:
Appendix A - Definitions
11.1.14:
Appendix B - General Coolant Information
11.1.14.1:
Appendix B - General Coolant Information
11.1.15:
Appendix C - Detroit™ Cooling System Maintenance Products
11.1.15.1:
Appendix C - Detroit Cooling System Maintenance Products
Chapter 13:
Customer Assistance
13.1:
Customer Assistance
13.1.1:
Using Road Service
13.1.2:
Availability of Detroit™ Service Outlets
How-To Procedures
In this section:
How to Procedures
How-to Procedures - Ops
