Public Technical Literature
  • Language
    English français Español italiano Deutsche português русский — Russian 日本語 — Japanese 中文 — Chinese
  • English français Español italiano Deutsche português русский — Russian 日本語 — Japanese 中文 — Chinese

DD Platform Heavy Duty EuroIV Operators Manual

  • Chapter 1: Forward
    • 1.1: Introduction
    • 1.2: Non-Genuine and Rebuilt Component Quality Alert
    • 1.3: Personnel Requirements
    • 1.4: Engine Conversions and Modifications
  • Chapter 4: Engine Identification
    • 4.1: Engine Components - DD Platform
    • 4.2: Engine Model and Serial Number Designation
  • Chapter 5: Operating Instructions for Starting the Engine
    • 5.1: First Time Start Preparations
      • 5.1.1: System Checks
        • 5.1.1.1: Checking the Cooling System
        • 5.1.1.2: Lubrication System Checks
          • 5.1.1.2.1: Pre-Lubricating the Engine
          • 5.1.1.2.2: Checking and Monitoring the Oil Level
          • 5.1.1.2.3: After an Extended Storage
        • 5.1.1.3: Fuel System Checks
          • 5.1.1.3.1: Adding Fuel
          • 5.1.1.3.2: Priming the Fuel System
        • 5.1.1.4: Checking Other Engine Parts
      • 5.1.2: Starting the Engine for the First Time
      • 5.1.3: Starting the Engine
      • 5.1.4: Running the Engine
        • 5.1.4.1: Checking the Oil Pressure
        • 5.1.4.2: Warming Up the Engine
        • 5.1.4.3: Inspection During Idling
        • 5.1.4.4: Checking the Transmission
        • 5.1.4.5: Checking for Fluid Leaks
        • 5.1.4.6: Checking the Crankcase
        • 5.1.4.7: Checking the Turbocharger
        • 5.1.4.8: Checking the Axial Power Turbine
        • 5.1.4.9: Avoid Unnecessary Idling
      • 5.1.5: Stopping the Engine
      • 5.1.6: Emergency Jump Starting
      • 5.1.7: Routine Engine Start
        • 5.1.7.1: Routinely Starting the Engine
        • 5.1.7.2: Checking the Coolant Level (Cold Check)
        • 5.1.7.3: Checking the Coolant Level (Hot Check)
      • 5.1.8: Monitoring the Engine Operation
        • 5.1.8.1: Monitoring the Battery Charging System
        • 5.1.8.2: Monitoring the Oil Pressure
        • 5.1.8.3: Excessive Idling
      • 5.1.9: Changing the Idle Speed
      • 5.1.10: Shutting Down the Engine after High Load Operation
      • 5.1.11: Emergency Running Mode
      • 5.1.12: Stop Engine Override Option
        • 5.1.12.1: Momentary Override
      • 5.1.13: Cold Weather Operation
        • 5.1.13.1: Winter Fronts
  • Chapter 6: Detroit Diesel Electronic Controls (DDEC) System
    • 6.1: DDEC VI System
      • 6.1.1: Motor Control Module Description
      • 6.1.2: Common Powertrain Controller
    • 6.2: Detroit Diesel Electronic Control System Operation
      • 6.2.1: Stop Engine Override Switch
      • 6.2.2: Immediate Speed Reduction
      • 6.2.3: Red Stop Lamp
      • 6.2.4: Diagnostic Tool
    • 6.3: Detroit Diesel Electronic Control System Features
      • 6.3.1: Data Recording Capability
      • 6.3.2: Engine Brake
      • 6.3.3: Engine Protection
      • 6.3.4: Idle Shutdown Timer
    • 6.4: Accelerating the Vehicle
    • 6.5: Cruise Control
    • 6.6: Engine Brake and Cruise Control
    • 6.7: DD Platform Shifting
    • 6.8: Idling
  • Chapter 9: Preventive Maintenance Intervals
    • 9.1: Preventive Maintenance Intervals
    • 9.2: Preventive Maintenance Tables
  • 11.1.9: Coolant Selections and Maintenance
    • 11.1.9.1: Coolant Selections and Maintenance
  • 11.1.10: Coolant Fill Options
    • 11.1.10.1: Coolant Fill Options
  • 11.1.11: Coolants for Detroit™ Engines
    • 11.1.11.1: Coolants for Detroit Engines
    • 11.1.11.2: Coolants NOT Permitted
    • 11.1.11.3: Non-Formulated Additives NOT Permitted
  • 11.1.12: Maintenance
    • 11.1.12.1: Maintenance
    • 11.1.12.2: Topping Off Coolant
    • 11.1.12.3: Coolant Maintenance Intervals
      • 11.1.12.3.1: Silicated Organic Acid Technology (Si-OAT) Coolant Maintenance Intervals
    • 11.1.12.4: Silicated Organic Acid Technology (Si-OAT) Coolant Additive Maintenance Procedures
    • 11.1.12.5: Standard Life Coolant Additive Maintenance Procedures
      • 11.1.12.5.1: Coolant Test Procedure
      • 11.1.12.5.2: Supplemental Coolant Additives (SCA)
  • 11.1.13: Appendix A - Definitions
    • 11.1.13.1: Appendix A - Definitions
  • 11.1.14: Appendix B - General Coolant Information
    • 11.1.14.1: Appendix B - General Coolant Information
  • 11.1.15: Appendix C - Detroit™ Cooling System Maintenance Products
    • 11.1.15.1: Appendix C - Detroit Cooling System Maintenance Products
  • Chapter 13: Customer Assistance
    • 13.1: Customer Assistance
      • 13.1.1: Using Road Service
      • 13.1.2: Availability of Detroit™ Service Outlets

Coolant Fill Options

In this section:

  1. Coolant Fill Options
    Coolant Fill Options - GHG17,BRO-0002; EUROV MBE900; Gen 5 DD13; Gen 5 D15 - #8726
Parent topic: How to Procedures

Powered by Titania Delivery Titania Delivery