Engine Support Fastener Checking

m2 mm 01.02.000

Front and rear engine supports for vehicles built from January 2007 require no periodic maintenance. Mounts should be inspected when the engine is removed for service. For vehicles manufactured prior to January 2007, perform the following check.

  1. Check the tightness of the engine support fasteners at the rear of the engine. Tighten the fasteners 241 lbf·ft (460 N·m).
  2. Check the tightness of the engine support fasteners at the front of the engine. Tighten the fasteners 136 lbf·ft (327 N·m).

    Note: When the engine is removed, inspect the lower and upper isolators for wear. Replace the isolators if necessary.
    Note:
    Parent topic: Engine
    Document Number: 0000119890
    Manual Publication Date: 2024-05-23
    Topic Publication Date: 2024-11-06