Hendrickson Spring Eye Pins, RT and RTE Series

m2 mm 32.02.003

Apply multipurpose chassis grease at the spring eye pin grease fitting, located on the inboard side of the spring eye pin, until clean grease appears at both ends of the spring eye pin. See Fig..

  • Minimum gap of 3/8 inch (9.5 mm).

  1. Forward (no. 1) Spring Hanger

  2. Spring Eye Pin

  3. Rear (no. 2) Spring Hanger

  4. Rear (no. 3) Extension

Fig. 1, Unloaded RTE Spring Suspension

Note:
Document Number: 0000120496
Manual Publication Date: 2024-05-23
Topic Publication Date: 2024-11-06