Inspection Procedure

m2 mm 42.16.000
Important: Perform the Brake InspectionBrake Inspection maintenance operations before lubricating the slack adjusters.
  1. Visually check for physical damage, such as broken air lines and broken or missing parts.
  2. Using a quality multipurpose chassis lubricant, NLGI Grade 2, lubricate the slack adjuster through the grease fitting until clean lubricant flows from the grease relief opening in the boot.
  3. Perform the In Service Inspection In Service Inspection .
Note:
Document Number: 0000120130
Manual Publication Date: 2024-05-23
Topic Publication Date: 2025-08-19