Lubrication of the Drag Link

p4 mm 46.04
  1. Park the vehicle on a level surface, shut down the engine, and set the parking brake. Chock the tires.
  2. Using a clean rag, wipe all dirt from the drag link grease fittings. See Fig. .

    1. Grease Fitting at Pitman Arm

    2. Grease Fitting at Axle Steering Arm

    Fig. 1, Drag Link

  3. Using a pressure gun and NLGI Grade 2 (8% 12-hydroxy lithium stearate grease) or NLGI Grade 1 (6% 12-hydroxy lithium stearate grease) chassis grease, apply clean grease at the grease fittings until old grease is forced out of the socket.
Note:
Parent topic: Steering
Document Number: 0000103338
Manual Publication Date: 2024-05-31
Topic Publication Date: 2025-12-17