Inspection of the Cable Gland Protection
ep3 mm 08.03.001
- Inspect all cable glands to make sure corrosion protection is not worn or damaged.
- If the corrosion protection is damaged, apply anti-corrosion
dielectric spray (48-25901-000) to the assembled cable gland.
- Apply the spray to cover all exposed metallic surfaces of the cable gland with not more than a 10 mm skirt on the surrounding surface of the connection.
Note: Do not spray the anti-corrosion spray on any part of the cable or coverings and/or tape.
Fig. shows corrosion protection applied to the cable glands.
Fig. 1, Cable Gland Protection
Important: Cable gland protection provides corrosion protection to the cable gland to inverter housing located in multple areas throughout the vehicle.
Note: