Dana Spicer

122SD mm 33.04.02

For any Dana Spicer axle that requires lubrication of the tie-rod, wipe the grease fittings clean, then pump multipurpose chassis grease, NLGI Grade 2 (8% 12-hydroxy lithium stearate grease), into the tie-rod ends until all used grease is forced out and fresh grease is seen at the ball stud neck.

Note:  For operation in very cold climates, use NLGI Grade 1 (6% 12-hydroxy lithium stearate grease).

Note:
Parent topic: Tie Rod Lubrication, Detroit and Dana Spicer Axles
Document Number: 0000125810
Manual Publication Date: 2025-02-11
Topic Publication Date: 2024-06-21