Lubrication of the Hood Rear Support

122SD mm 88.01.01
  1. Park the vehicle on a level surface, shut down the engine, and set the parking brake. Chock the tires.
  2. Open the hood.
  3. Clean both the hood- and cab-mounted hood rear support components with a soapy water solution.
  4. Cover all contact surfaces of the hood rear support brackets and isolators with an approved multi-purpose, lithium-complex, soap-based grease; see Table..
  5. Close the hood.

    Table 1, Approved Suppliers of Multi-Purpose Lithium Grease

    Approved Suppliers of Multi-Purpose Lithium Grease

    Supplier

    Grease

    Chevron

    Delo Heavy Duty EP

    Exxon

    Unirex EP2

    Mobil

    Mobil Grease XHP 222

    Shell

    Retinax LC Grease

    Texaco

    Starplex 2

      Table 1, Approved Suppliers of Multi-Purpose Lithium Grease

    Note:
    Parent topic: Hood, Grille, and Cab Fenders
    Document Number: 0000126073
    Manual Publication Date: 2025-02-11
    Topic Publication Date: 2024-06-21