Dana Spicer Camshaft Bracket Lubrication

122SD mm 42.08.01

Important: Perform a brake inspection before lubricating the camshaft bracket.

Pump grease into the camshaft bracket until it appears at the slack adjuster end of the bracket. See Fig..

  • Grease Exit

  1. Brake Chamber

  2. Slack Adjuster

  3. Non-Pressure-Relief Grease Fitting

Fig. 1, Camshaft Bracket Lubrication

Use an NLGI Grade 1 or Grade 2 multipurpose chassis grease. If grease leaks out under the camhead, the camshaft bracket grease seal is worn or damaged; replace it. See Group 42 of the 122SD and Coronado Workshop Manual for grease seal replacement instructions.

Note:
Parent topic: Brakes
Document Number: 0000125972
Manual Publication Date: 2025-02-11
Topic Publication Date: 2024-06-21