Installation of the Final Filter - Three-Filter System
Installation of the Final Filter - Three-Filter
System - DD - Ops #3499
Install the final filter as follows:
- Install a new final filter cap seal ring.
- Snap new final filter into the final filter cap.
- Apply a light coat of petroleum-based lithium grease to
the cap seal ring (1) and to the lower seal on the final filter.
- Install the final filter into the fuel filter module.
- Turn the cap counterclockwise until a "click" sound is made, then turn clockwise and hand tighten.
- Torque final filter cap to 55 to 60 N·m (40 to 44 lb·ft).
- Once all required filters have been changed, prime the fuel system. Priming the Fuel System - Three-Filter System.