Specify the e-mail addresses of other users, one per line
Okay
Cancel
Your session has been submitted.
Your session has been saved.
Failed to submit your session.
Failed to save your session.
All of the information you filled out on this form will be permanently deleted.
Yes, delete my session data.
All of the information you filled out on this form will be permanently deleted.
Finalize and submit this form?
Hide or show technician note textbox.
Required Special Tools
Recommended Shop Tools
You may have invalid TechLane data. We recommend refreshing the page. If you continue to see this, please contact your administrator. Would you like us to refresh the page for you?
No form data to submit.
Failed to save your favorites change. Please try again later. If you continue to see this message. Please contact your administrator.
We are unable to create your session at this time. Please try refreshing your page. If you continue to see this error, please contact your administrator.
Chapter
Error saving form data. Try refreshing your page, and if the issue persists, please contact your administrator.
XXXX-XX-XX
XXXX-XX-XX
M1 Maintenance Interval Operations:00–05
57X mm 00.05.001
The M1 Maintenance Interval Operations tables list all
maintenance operations that are to be performed at the M1 maintenance
interval. Maintenance operation numbers are reference numbers used
to help you find detailed instructions in this manual on the maintenance
operations to be performed.
Important: After performing
all operations listed in this table, perform all daily, weekly, and
monthly maintenance operations listed in the "Pretrip and Post-Trip
Inspections and Maintenance" chapter of the 57X Driver's Manual.
Table 1,
M1 Maintenance Interval Operations for Service Schedules I
and II
Maintenance Operation Number
M1 Maintenance Interval Operations for Service Schedules
I and II
On vehicles
equipped with Detroit transmissions, the release bearing does not
need to be lubricated. On vehicles equipped with Eaton Fuller UltraShift
PLUS transmissions, lubricate the release bearing every 50,000 miles
(80 000 km) or three months.
If equipped with an oil-coalescing desiccant cartridge,
replace the cartridge once a year, regardless of mileage. Otherwise
use the M3 maintenance interval.
Complete this procedure every
25,000 miles (40 225 km), three months, or 500 operating hours, whichever
comes first.
Table 1,
M1 Maintenance Interval Operations for Service Schedules I
and II