General Information

57X mm 42.11.001

Important: Perform the Brake Inspection maintenance operation before lubricating the slack adjusters.

  1. Visually check for physical damage, such as broken air lines and broken or missing parts.

  2. Using a quality multipurpose chassis lubricant, NLGI Grade 2, lubricate the slack adjuster through the grease fitting until clean lubricant flows from the grease relief opening in the boot.

  3. Perform the "In Service Inspection."

Note:

In this section:

  1. In Service Inspection
    57X mm 42.11.002
Parent topic: Versajust Slack Adjuster Inspection and Lubrication
Document Number: 0000113556
Manual Publication Date: 2024-05-13
Topic Publication Date: 2024-10-31