Vehicle Maintenance Schedule Table: 00–02

rv mm 00.02.000

Table 1, Maintenance Operation Procedures and Schedule

Maintenance Operation Procedures and Schedule

Maintenance Operation Number and Description

Maintenance Interval in Miles x 1000

6

15

30

45

60

75

90

105

120

135

150

165

180

195

210

225

240

255

270

285

Maintenance Interval in Kilometers x 1000

9

24

48

72

96

120

145

169

193

217

241

265

290

314

338

362

386

410

434

458

Maintenance Interval in Months

6

12

24

36

48

60

72

84

96

108

120

132

144

156

168

180

192

204

216

228

Inspecting the Engine Drive Belt

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Checking the Engine-Support Fasteners

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Inspection and Replacement of the Air Cleaner

When first purchased, if the Recreational Vehicle is older than the current model year, replace the air filter.

Inspect the air cleaner every 12 months. Replace the air filter every 24 months, or when filter restriction exceeds the value shown in Inspection and Replacement of the Air Cleaner (if equipped with an air restriction gauge).

Inspection and Cleaning of the Charge Air Cooler (CAC)

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Inspection of the Air Compressor

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Alternator, Battery, and Starter Connections Check

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Radiator Cap Check

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Inspection and Cleaning the Radiator

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Replacement of the Coolant1

Replace the organic acid technology (OAT) coolant every 600,000 miles (965 400 km). Supplemental coolant additives (SCAs) are not used with OAT coolant.

Mechanical Fan Drive Gearbox Oil Change

•

•

•

•

•

•

•

•

•

•

Lubrication the U-Joint

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Checking the Transmission Breather

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Cold Check

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Changing the Allison Transmission Fluid and Filter(internal/external filter)

For oil and filter change intervals, see the applicable Allison Operator's Manual.

Lubricating the Throttle Pedal Pivot Pin

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Suspension Fastener Torque Check

•

•

•

•

•

•

•

•

•

•

Suspension Height Control Valve Check

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Inspection of the Neway Suspension

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

ZF IFS Lubrication

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Freightliner Spring Front and Rear Suspension Spring Assemblies Inspection

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Suspension U-Bolt Torque Check

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

General Description

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Detroit™ Axles2

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Lubricating and Inspecting the Tie-Rod End3

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Checking the Drive Axle Alignment

•

Inspection of the Wheel End

•

•

•

•

•

•

•

•

•

•

•

Checking the Oil-Filled Hubs Oil Level

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Changing the Oil-Filled Hubs Oil

•

•

•

•

•

•

•

•

•

•

Checking the Axle Lubricant Level

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Draining the Axle

For Detroit™ rear axles with petroleum-based oil, change the lubricant every 100,000 miles (160 900 km) or every 12 months, whichever comes first; if synthetic oil is used, change the lubricant every 250,000 miles (402 250 km) or every 36 months, whichever comes first. For Meritor rear axles with petroleum-based oil, change the lubricant at 100,000 miles (160 900 km) or at 12 months of service, whichever comes first, and every 24 months thereafter; if synthetic oil is used, change the lubricant every 250,000 miles (402 250 km) or every 36 months, whichever comes first.

Checking the Axle Breather

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Checking the Oil-Filled Hubs Oil Level, Tag Axle

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Changing the Oil-Filled Hubs Oil, Tag Axle

•

•

•

•

•

•

•

•

•

•

Checking the Wheel Nut

•

•

•

•

•

•

•

•

•

•

Accuride® Machined and Polished Aluminum Wheels

Perform these steps each time the wheels and/or the vehicle is washed.

Inspection of the Driveline

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Inspecting the Brake System Valves

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Air Dryer Checking Procedures

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Bendix AD-9

•

•

•

•

•

•

•

Lubricating the Camshaft Bracket Bushing

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Haldex

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Lubricating the Foot Brake Valve Actuator

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Inspecting the Bendix Hydro-Max® Brake System (front-engine diesel chassis)

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Lubricating the Brake Caliper Slide Pin, Bosch Brakes (front-engine diesel chassis)

Lubricate every 6 months OR every 18,000 miles (28 962 km), whichever comes first.

Checking the Brake Lines, Hydraulic Disc or Air Brakes

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Checking the Brake Lining Wear, Hydraulic Disc Brakes (front-engine diesel chassis)

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Parking Brake Operational Check

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Lubricating the Meritor Roller Pin

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

General Guidelines

Complete this procedure every 25,000 miles (40 225 km), 3 months, or 500 operating hours, whichever comes first.

Operating Test

The automatic drain valve should be inspected every 6 months or 1500 operating hours, whichever comes first.

Lubricating the Drag Link

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Side-Mounted

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Changing the Power Steering Fluid and Filter

Replace the power steering fluid and filter every 500,000 miles (804 500 km).

Lubricating the Steering Driveline

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Lubricating the Steering Gear

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Checking the Fuel Tank Mounts and Fuel Line

•

•

•

•

•

•

•

•

•

•

Alliance

See the applicable engine operation and maintenance manual for fuel/water separator element replacing intervals.

General Description

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Checking and Cleaning the Ground Cables

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Checking the Battery Voltage

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Inspecting the Air Conditioner

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Table 1, Maintenance Operation Procedures and Schedule

Note:
Document Number: 0000119804
Manual Publication Date: 2024-05-23
Topic Publication Date: 2024-11-13