Checking the Axle Breather

rv mm 35.03.000

Note: Detroit axles have a breather hose wrapped around the housing breather. The breather hose length should not be lower than approximately 1 inch below the axle housing weld seam.

The axle housing breather must remain clean. See Fig. and Fig.. When the axle lubricant level is checked, check that the axle breather is open. Check more often under poor operating conditions. If the breather is plugged, clean it or replace it as needed.

Note: Typical engine-rear configuration shown; engine-front configuration is similar.

  • Rear View

  • Front View

  1. Axle Housing Breather

  2. Breather Hose

  3. Oil Fill Plug

  4. Oil Drain Plug

Fig. 1, Component Locations, Detroit Axles

  1. Axle Housing Breather

  2. Oil Fill Plug

Fig. 2, Component Locations, Meritor Axles

Note:
Document Number: 0000120616
Manual Publication Date: 2024-05-23
Topic Publication Date: 2024-11-13