Checking Valve Lash

Checking Valve Lash - EuroV MBE900
Check valve lash as follows:‪
  1. For each valve, measure the valve lash with a feeler gauge between the rocker arm and valve stem (exhaust valve) or valve bridge (intake valve). It should be possible to pull the feeler gauge through with no more than light resistance.
  2. If the value measured is within the range listed in Table "Valve Lash Checking and Adjustment" in the "Check For" column, check the next valve.
  3. If the value measured is within the range listed in Table "Valve Lash Checking and Adjustment" in the "Check For" column, check the next valve.
Note:
Parent topic: Required Maintenance Operations
Document Number: 0000035912
Manual Publication Date: 2024-01-05
Topic Publication Date: 2023-05-29