Changing the Idle Speed

Changing the Idle Speed - Ops - EuroV MBE900 - #6556
The idle speed can be variable if the parameters in the CPC are set to the default range. Change the idle speed as follows:
  1. Turn the cruise control switch to the ON position.
  2. To increase the idle speed, push the RSM/ACC switch until the idle reaches the desired rpm.
  3. To decrease the idle speed, push the SET/CST switch until the idle reaches the desired rpm.
Note:
Document Number: 0000035888
Manual Publication Date: 2024-01-05
Topic Publication Date: 2023-03-28