Door Locks and Handles
One key operates the ignition switch and all of the door locks.
Important: Each key is numbered. Record the number so a duplicate key can be made, if needed.
To unlock the driver's door from outside the cab, insert the key in the lockset and turn it one-quarter turn clockwise (see Fig.). To remove the key, turn it counterclockwise to its original position. Pull out on the door pull handle to open the door.
-
Key
-
Lock
-
Door Pull Handle
Fig. 1, Exterior Door Handle
To unlock the passenger's door from outside the cab, insert the key in the lockset and turn it one-quarter turn counterclockwise. Turn the key clockwise to the original position to remove it.
To open the door from the inside, lift up on the door lever. This will unlatch the door whether or not it is locked. See Fig..
Note: The cab door locks can be operated when the doors are open.
To lock a door from outside the cab, insert the key in the lockset and turn it in the direction opposite to the unlocking direction (counterclockwise for the driver's door, clockwise for the passenger's door). Close the door if it is open.
To lock either door from inside the cab, push the lock button downwards (see ). To unlock the door without unlatching it, push the lock button upwards. A red dot will show below the lock button when it is unlocked.
To open the door from the inside, lift up on the door lever (arrow).
-
Lock Button
-
Armrest/Handle
-
Door Lever
-
Window Crank
-
Inner Door Grab Handle (optional)
Fig. 2, Door Interior
Move the button down to lock, and up to unlock (arrows). The door is unlocked when the red dot shows.
-
Door
-
Lock Button
-
Red Dot