Upshifting

108SD d 14.04.005

Note: With the transmission in drive in the automatic mode, upshifts require no driver interaction.

  1. With the transmission in drive in the manual mode, pull the control lever up (towards the driver) to upshift. If the requested gear is available, the transmission will upshift and the new gear will display on the gear indicator.

    2. Note: Two consecutive, momentary upward pulls will cause a skip shift when the next two higher gears are available and conditions are appropriate.

  2. To skip shift, move the control twice in less than ½-second. The number of the gear engaged will appear on the gear indicator.

    Note: The Eaton Fuller AutoShift transmission is able to perform triple upshifts when the next three higher gears are available and conditions are appropriate. To triple-shift, move the control three times in less than ½-second.
      If the gear requested is unavailable, a tone will sound. An unavailable requested upshift is not stored in memory; the upshift must be requested again.
    Note:
    Parent topic: Eaton Fuller AutoShift Automated Transmissions
    Document Number: 0000111862
    Manual Publication Date: 2024-09-03
    Topic Publication Date: 2024-05-02