Neutral

108SD d 14.04.007

Select neutral by sliding the gear selector switch to the N position.

N is located directly below R on the four-position gear selector switch on the SmartShift control lever. To select N, move the gear selector switch to the position below R. When neutral is selected, the letter N displays on the current gear indicator.

Note: Neutral is always available during operation. When in neutral, upshift and downshift requests are ignored. If the gear selector switch is moved from neutral (N) to drive (D) while the vehicle is moving, the transmission will shift into the gear that is appropriate for the road speed of the vehicle.

Note:
Parent topic: Eaton Fuller AutoShift Automated Transmissions
Document Number: 0000111815
Manual Publication Date: 2024-09-03
Topic Publication Date: 2024-05-02