Cruise Control Switches
Note: See Engine Protection—Warning and Shutdown for detailed information about cruise control operation.
Cruise control is activated by two dash-mounted switches (see Fig.).
-
On/Off Switch—a two-position rocker labeled SPD CNTL on the lower half of the switch. When cruise control is on, an amber light illuminates the top part of the switch.
-
Set/Resume Switch—a three-position paddle switch labeled RES/ACC above the paddle and SET/CST below the paddle.
Notice: When the cruise control is engaged, do not attempt to shift gears without using the clutch pedal. Failure to follow this precaution will result in a temporarily uncontrolled increase in engine speed. Transmission damage and gear stripping could result.
To turn cruise control on, press the upper half of the On/Off switch. To turn cruise control off, press the lower half of the On/Off switch.
To increase cruise speed, raise and hold the paddle of the Set/Resume switch to RES/ACC until the vehicle accelerates to the desired speed. To decrease cruise speed, lower and the paddle of the Set/Resume switch to SET/CST until the vehicle decelerates to the desired speed.
-
Cruise Control On/Off Switch
-
Cruise Control Set/Resume Switch