Rear Towing Hookup

sb dm 14.01.002

Warning: Do not tow an unbraked vehicle if the combined weight of both vehicles is more than the sum of the gross axle weight ratings (GAWR) of the towing vehicle. Otherwise brake capacity will be inadequate, which could result in personal injury or death.

Important: When it is necessary to tow the vehicle, follow the instructions below closely to prevent damage to the vehicle.

When towing or pushing any vehicle equipped with an Allison transmission, disconnect the driveshaft at the rear axle and support it as necessary, regardless of the distance or speed traveled.

Note: Towing rules and regulations vary from federal, state, local, and transit authority. These laws must be followed when towing the vehicle.

  1. Position the front tires so that they point straight ahead and secure the steering wheel in this position.
  2. Disconnect the battery ground cable.
  3. Warning: Due to the many variables that exist in towing, positioning the lifting and towing device is the sole responsibility of the tow vehicle operator. The operator must be familiar with standard towing industry safety measures. Improper procedures could result in personal injury or death.

  4. Attach the towing device.
  5. Lift the vehicle and secure the safety towing chains. If additional clearance is needed, remove the bumper extension, if so equipped.
  6. Connect the clearance lights, taillights, and signal lights. Also connect any special towing lights required by local regulations.
Note:
Document Number: 0000117611
Manual Publication Date: 2024-05-06
Topic Publication Date: 2024-05-07