eCarrier Oil Filter and Fluid Change

ep3 mm 35.03
  1. Park the vehicle on a level surface, shut down the vehicle, and set the parking brakes. Chock the tires.
  2. Place a drain pan under the drain plug of the eCarrier.
  3. Remove the drain plug and oil filter shown in Fig..

    Fig. 1, Drain Plug and Oil Filter

  4. Let the oil drain out of the eCarrier.

    5. Note: There is a spring behind the drain plug. Catch the drain plug as it releases from the eCarrier.

  5. Remove oil filter from the eCarrier oil pump.
  6. Clean any debris out of the mesh filter shown in Fig..

    Fig. 2, Oil Mesh Filter

  7. Install a new oil filter onto the eCarrier oil pump.
  8. Install the drain plug and filter. Tighten the drain plug 111 lbf·ft (150 N·m).
  9. Remove the fill plug shown in Fig..

    Fig. 3, eCarrier Fluid Fill Plug

  10. Fill the eCarrier with oil until the oil level reaches the fill plug threads. See Table..

    11. Important: The lubricant used in eCarrier (eMotor) must meet Detroit Fluids Specification (DFS) 93K230. For more product information, see DDC-SVC-BRO-121 on the DTNA Connect Portal.

  11. Install the oil fill plug. Tighten the fill plug 85 lbf·ft (115 N·m).

    Table 1, eCarrier Lubricant Capacity

    eCarrier Lubricant Capacity

    Axle

    Oil Capacity: Quarts (liters)

    Front-Rear and Single

    6.7 (7.1)

    Rearmost Tandem

    10.4 (11.0)

      Table 1, eCarrier Lubricant Capacity

    Note:
    Parent topic: Rear axle
    Document Number: 0000121308
    Manual Publication Date: 2025-02-11
    Topic Publication Date: 2024-06-04