M1 Maintenance Interval Operations

em2 mm 00.05

The M1 Maintenance Interval Operations tables list all maintenance operations that are to be performed at the M1 maintenance interval. Maintenance operation numbers are reference numbers used to help you find detailed instructions in this manual on the maintenance operations to be performed.

Important: After performing all operations listed in this table, perform all daily, weekly, and monthly maintenance operations listed in the 'Pretrip and Post-Trip Inspections and Maintenance' chapter of the eM2™ Driver's Manual.

Table 1, M1 Maintenance Interval Operations for Service Schedules I

Maintenance Operation Number

M1 Maintenance Interval Operations for Service Schedule I

Check

Inspection of the Air Compressor Inspection of the Air Compressor  
General Information General Information  
Wheel Nut Check Wheel Nut Check  
Tire Check Tire Check  
Parking Brake Operational Check Parking Brake Operational Check  
Operating and Leakage Tests of the Bendix Automatic Drain Valve Operating and Leakage Tests of the Bendix Automatic Drain Valve1  
Testing the Natural Gas Detection System Sensor Testing the Natural Gas Detection System Sensor2  
Cab Shock Absorber Bracket Torque Check Cab Shock Absorber Bracket Torque Check  
Inspection of the Aerodynamic Component Inspection of the Aerodynamic Component  
  1. Test the gas detection system sensor three times per year.
  2. Test the gas detection system sensor three times per year.

Table 1, M1 Maintenance Interval Operations for Service Schedules I

Note:
Parent topic: General Information
Document Number: 0000121529
Manual Publication Date: 2025-02-11
Topic Publication Date: 2024-06-04