Adding Fuel
Adding Fuel - DD5 Ops - #3359
When adding fuel, pay attention to the following:
Notice: Always use Ultra-Low Sulfur Fuel
(ULSF) with 15 PPM sulfur content or less, based on ASTM Standard
D2622 test procedure. Higher sulfur levels will damage the engine
Aftertreatment System (ATS).
- Add winter or summer grade fuel according to the season of the year.
- Work in the cleanest conditions possible.
- Prevent water from entering the fuel tank.
For further information, Refer to Section "How to Select Diesel Fuel".
Note: