M1 Maintenance Interval Operations: 00–05
P4, 5th Generation Cascadia MMs – Group 00
The M1 Maintenance Interval Operations tables list all maintenance operations that are to be performed at the M1 maintenance interval. Maintenance operation numbers are reference numbers used to help you find detailed instructions in this manual on the maintenance operations to be performed.
Important: After performing all operations listed in
this table, perform all daily, weekly, and monthly maintenance operations
listed in the ‘Pretrip and Post-Trip Inspections and Maintenance’
chapter in the New Cascadia™ Driver's Manual.
Table 1, M1 Maintenance Interval Operations for Service Schedules I and II
- On vehicles equipped with Detroit transmissions, the release bearing does not need to be lubricated. On vehicles equipped with Eaton Fuller UltraShift PLUS transmissions, lubricate the release bearing every 50,000 miles (80 000 km) or 3 months. † If equipped with an oil-coalescing desiccant cartridge, replace the cartridge once a year, regardless
- If equipped with an oil-coalescing desiccant cartridge, replace the cartridge once a year, regardless of mileage. Otherwise use the M3 maintenance interval.
- Complete this procedure every 25,000 miles (40 225 km), 3 months, or 500 operating hours, whichever comes first.
- The automatic drain valve should be inspected every 6 months or 1500 operating hours, whichever comes first.
Table 1, M1 Maintenance Interval Operations for Service Schedules I and II
Note: