Initial Maintenance (IM) Operations: 00–04

P3, P4, and 5th Generation Cascadia MMs – Group 00

Table lists all maintenance operations that are to be performed at the Initial Maintenance (IM) interval. The ‘maintenance operation numbers’ are reference numbers used to help you find detailed instructions about the maintenance operations to be performed in this manual. All operations listed in the table, along with the operations listed in the applicable M1 maintenance interval table (see M1 Maintenance Interval Operations: 00–05), must be performed to complete the initial maintenance.

Table 1, Initial Maintenance (IM) Operations for Service Schedules I and II

Maintenance Operation Number	Maintenance Operation	Check
M1 Maintenance Interval Operations: 00–05	M1 Maintenance Interval Operations: 00–05
Checking the Torque of the Frame Fastener	Checking the Torque of the Frame Fastener
Checking the Torque on the Suspension U-Bolt	Checking the Torque on the Suspension U-Bolt
All-Axle Alignment Check	All-Axle Alignment Check
Operating and Leakage Tests of the Bendix Automatic Drain Valve	Operating and Leakage Tests of the Bendix Automatic Drain Valve¹
Tightening the Fuel Tank Band-Nut	Tightening the Fuel Tank Band-Nut

The automatic drain valve should be inspected every 6 months or 1500 operating hours, whichever comes first.

Table 1, Initial Maintenance (IM) Operations for Service Schedules I and II

Note:

New Cascadia Maintenance Manual

Initial Maintenance (IM) Operations: 00–04

Table 1, Initial Maintenance (IM) Operations for Service Schedules I and II

Table 1, Initial Maintenance (IM) Operations for Service Schedules I and II