Sleeper Bunks
Note: Make sure bunks are locked in place before sleeping or driving the vehicle.
Sleeper cabs can come with a lower bunk, an upper bunk, or both.
Lower bunk configurations include a bed with a storage compartment or, in 72 inch sleepers, a pull-down bed with two foldable seats and a table.
The release lever to unlock the storage bed is centered under the bunk. Press the lever to the right and pull up on the bunk to access the storage compartment. Pushing the bunk back into its original horizontal position will cause the bed latches to lock.
Setting up the pull-down bed, shown in Fig., consists of the following steps.
-
Table T-Pull Handle
-
Pull-Down Bed Release Latch
-
Lower Bunk Locks
-
Seatbelts
-
Seat Latches
-
Lower Bunk Latch Pins
-
Upper Bunk Latch Pins Engaged in Upper Locks
Fig. 1, Pull-Down Bed With Lounge
Note: To avoid damaging the upholstery, unlatch and move the seatbelts to the side before folding the chairs closed.
- Pull forward on the seat latch while lowering the chair back toward the seat, and fold it down.
- Pull the table t-pull handle forward, then push down on the top of the table until it is at the same level as the folded seats.
- Pull out the bed release latch until you feel a release of tension. See Fig., item 2.
- Grasping the edge of the bed, pull it down until the lower latch pins engage in the lower bunk locks.