Adjustment of the Headlight Aim

47x 20.03.000

Notice: Do not use power tools to adjust headlight aim. Doing so will strip or break the adjusting screw.

The adjusting screw is located on the bottom of the headlight assembly and is accessible from inside the wheel well when the hood is closed. See Fig. .

Fig. 1, Headlight Adjusting Opening (shown with hood open)

  1. Access the headlight adjusting opening.
  2. Remove the plug.
  3. Use a 6mm Allen key to the adjust the screw (see Fig.) until the beam standard meets the acceptable standard. Adjusting the screw clockwise raises the beam and adjusting it counterclockwise lowers it.

    Fig. 2, Headlight Adjusting Screw (shown with hood open)

Note:
Parent topic: Headlights
Document Number: 0000117252
Manual Publication Date: 2024-05-09
Topic Publication Date: 2024-05-09