Cruise Control Switches
Note: See Engine Protection—Warning and Shutdown for detailed information about cruise control operation.
On/Off Switch
Press the upper half of the cruise control on/off switch to activate it. See Fig..
-
Cruise Control On/Off Switch
-
Cruise Control Set/Resume Switch
Fig. 1, Cruise Control Switches
Note: Cruise control is canceled if the brake or clutch pedal is depressed, or engine speed drops below 1200 rpm.
Set/Decelerate/Resume/Accelerate Switch
The set/decelerate/resume/accelerate switch can only be used when cruise control has been activated. See Fig..
Press the upper half of the switch momentarily to set the cruise speed (with the engine running at the desired speed). Press and hold the upper half of the switch to decelerate slowly. Release the switch when the desired speed is reached.
Press the lower half of the switch momentarily to resume the previously set cruise speed. Press the lower half of the switch and hold to accelerate slowly. Release the switch when the desired speed is achieved.
Notice: When the cruise control is engaged, do not attempt to shift gears without using the clutch pedal. Failure to follow this precaution will result in a temporarily uncontrolled increase in engine speed. Transmission damage and gear stripping could result.