Setup Information
SD DM 04.04.22
See Fig. for a diagram of the setup information screens.
The current selection flashes. Hold the upper half of the +/- INFO switch to toggle between choices, then release the button and briefly press it to select. To exit the screen, press the MY INFO switch.
Fig. 1, ICU4M Setup Information Screens
Setup information allows you to program various features of the ICU4M environment, including:
-
Service intervals (OFF/MILES/HOURS);
-
Ambient Temperature Warning (ON/OFF);
-
Target MPG;
-
LCD Lamp (ON/OFF);
-
Driver message display brightness;
-
Language (English, French, Spanish);
-
Units of measurement (English/Metric);
-
Reset parameters to original settings.
- Press the MY INFO switch to advance to the service interval screen. Press and hold the upper half of the +/- INFO switch to toggle between OFF , MILES , and HOURS . Release the upper half of the +/- INFO switch at the desired choice, then press it again briefly to select the choice. If you select OFF at the selection screen (meaning you have turned off service interval information), the screen will skip the remaining service screens.
- Press the MY INFO switch to go to the change screen. Hold the upper half of the +/- INFO switch to scroll through the intervals, then release and briefly press the upper half of the +/- INFO switch again to select the desired interval.
- Press the MY INFO switch to advance to the TEMPERATURE WARNING screen. Press the MY INFO switch to go to the change screen. Press the upper half of the +/- INFO switch to toggle between ON and OFF.
- Press the MY INFO switch to advance to the CHANGE TARGET MPG screen. Press the MY INFO switch to go to the change screen.
- Press the MY INFO switch to advance to the CHANGE LCD LAMP screen. Press the MY INFO switch to go to the change screen. Press the upper half of the +/- INFO switch to toggle between ON and OFF.
- Press the MY INFO switch to advance to the CHANGE BRIGHTNESS screen. Press the MY INFO switch to go to the change screen.
- Press the upper or lower half of the +/- INFO switch to select the desired brightness setting.
- Press the MY INFO switch to advance to the CHANGE LANGUAGE screen. Press the MY INFO switch to go to the change screen.
- Press the upper or lower half of the +/- INFO switch to select the desired language.
- Press the MY INFO switch to advance to the CHANGE UNITS screen. Press the MY INFO switch to go to the change screen.
- Press the upper or lower half of the +/- INFO switch to toggle between English and metric.
- Press the MY INFO switch to advance to the RESET
PARAMETERS screen.
- Press the MY INFO switch to go to the change screen.
- Press the upper half of the +/- INFO switch to toggle between YES and NO.
- Press the MY INFO switch to return to the beginning of the setup menus.
Note: