Reset Procedure

SD DM 14.02.20

Transmission operation can sometimes be restored by doing the following reset procedure:

  1. Stop the vehicle when it is safe to do so. Set the parking brake.
  2. Place the selector switch in neutral and turn off the ignition.
  3. Check all harness connectors as described in Safety Precautions .
  4. Wait at least two minutes with the engine shut down.
  5. Restart the engine. If the problem continues, contact an authorized Freightliner or Eaton service facility.
Note:
Parent topic: Ultrashift PLUS Diagnostics
Document Number: 0000123447
Manual Publication Date: 2025-01-23
Topic Publication Date: 2025-01-23