Parked-HVAC Controls
The control panel for the parked HVAC is located on the left side of the rear wall, in the sleeper. It has a temperature-control dial, and a 4-position mode switch. Turn the temperature-control dial to the left for cooling, and to the right for heat. See Fig.. See Table. for a description of the mode functions.
After using the system, turn the mode switch to the OFF position, even if the unit is not running, or the batteries may not charge properly.
-
Temperature-Control Dial
-
Mode Switch
-
A/C Only
-
Heat Only
-
AUTO
-
OFF
Fig. 1, Parked-HVAC Control Panel
Table 1, Parked-HVAC Mode Operation
|
Parked-HVAC Mode Operation |
|
|
Mode |
Function |
|
OFF |
Turns the unit OFF. |
|
AUTO |
Allows the unit to automatically heat or cool the sleeper, depending on the temperature setting and the sleeper temperature. Adjusts the compressor, heater, and fans to keep temperature constant. |
|
Heat Only |
Allows only the heat portion of the system to run. Adjusts the heater only to keep the temperature constant. |
|
A/C Only |
Allows only the A/C portion of the system to run. Adjusts compressor and fans only to keep the temperature constant. |