General Information

SD DM 14.02.01

Eaton Fuller UltraShift PLUS automated transmissions use shift selection software and electric clutch actuation; a clutch pedal is not needed to operate the vehicle. These transmissions use the four-position SmartShift control (see Fig.) on the steering column to select mode, direction, neutral, low, and to make manual shifts. To know what gear the transmission is in, see the current gear indicator on the dash. Forward shifts can be made either manually or automatically.

To upshift manually, pull the lever up (towards you). To downshift manually, push the lever down (away from you).

  1. SmartShift Control Lever

  2. Slide Switch (forward driving mode switch)

  3. MAN Mode (of slide switch)

  4. AUTO Mode (of slide switch)

  5. Upshift Direction

  6. Reverse Position (of selector switch)

  7. Selector Switch

  8. Neutral Lock Button

  9. Neutral Position (of selector switch)

  10. Drive Position (of selector switch)

  11. Low Position (of selector switch)

  12. Downshift Direction

Fig. 1, SmartShift Control (with Eaton Fuller UltraShift PLUS and AutoShift)

Note:
Parent topic: Eaton Fuller UltraShift PLUS Automated Transmissions
Document Number: 0000123402
Manual Publication Date: 2025-01-23
Topic Publication Date: 2025-01-23