Inspection and Cleaning of the External A/C Condenser
p4 mm 83.03.002
The BPHS A/C condenser is located on the backwall of the sleeper. Inspect the condenser as follows.
- Check for debris in the condenser housing.
- If needed, remove the condenser cover fasteners, then remove
the cover. See Fig. or
Fig..
Note: Remove the condenser cover.
Fig. 1, Condenser Cover Fasteners (wide style condenser)
Note: Remove the condenser cover.
Fig. 2, Condenser Cover Fasteners (compact style condenser)
- Clean out any debris in the module.
- Install the cover.
Note: If the condenser core has a build-up of fine debris, an A/C core cleaner, approved for copper and aluminum cores, and a low pressure stream of water can be used to clean it.
Note: