Filling of the Axle

wv mm 35.04.
  1. Remove the fill plug from the drive axle rear cover or the side of the carrier assembly, depending on the axle model.
  2. Fill the drive axle with lubricant until the level is even with the bottom of the fill hole, as shown in Fig..
  3. Install the fill plug.

    1. Drive Axle Fill Plug

    Fig. 1, Drive Axle Fill Plug

Note:
Parent topic: Changing the Dana eAxle Lubricant
Document Number: 0000116641
Manual Publication Date: 2024-05-14
Topic Publication Date: 2024-11-19