Lubrication and Fluid Level Check: 00–06

4700 mm 00.06.001

Table. summarizes all operations that must be performed to complete Lubrication and Fluid Level Check Operation 00–06 called for as an M1 maintenance interval for Service Schedule I and II vehicles.

Maintenance operation numbers given in the table are reference numbers used to help you find detailed instructions in the manual on the lubrication or fluid checking.

Table 1, Lubrication and Fluid Level Check for Service Schedules I and II

Lubrication and Fluid Level Check for Service Schedules I and II
Maintenance Operation Number Operation Description Check
Clutch Release Bearing Lubrication Clutch Release Bearing Lubrication1  
Clutch Release Cross-Shaft Lubrication Clutch Release Cross-Shaft Lubrication  
Sleeve Assembly Bronze Bushing Lubrication Sleeve Assembly Bronze Bushing Lubrication  
Fluid Level Check, Hydraulic Clutch Control Fluid Level Check, Hydraulic Clutch Control  
Allison Transmission Allison Transmission  
General information General information  
Trailer Electrical Connector Lubrication Trailer Electrical Connector Lubrication  
Front Suspension Front Suspension  
Detroit® Axles Detroit® Axles2  
Lubrication of the Tie Rod Lubrication of the Tie Rod3  
Lubrication of the Front Axle Wheel Bearing Lubrication of the Front Axle Wheel Bearing  
Front Drive Axle Lubricant Level Check Front Drive Axle Lubricant Level Check  
Drive Axle Lubricant Level Check Drive Axle Lubricant Level Check  
Lubrication Of The Universal Joint Lubrication Of The Universal Joint  
Camshaft Bracket Lubrication Camshaft Bracket Lubrication  
General Information General Information  
Lubrication of the Drag Link Lubrication of the Drag Link  
Lubrication Of The Steering Shaft Lubrication Of The Steering Shaft  
Lubrication Of The Power Steering Gear Lubrication Of The Power Steering Gear  
Door Seal, Door Latch, Door Hinge, and Door Check Lubrication Door Seal, Door Latch, Door Hinge, and Door Check Lubrication  
Hood Rear Support Lubrication Hood Rear Support Lubrication4  
  1. For Eaton Easy Pedal Advantage clutches, the interval is 50,000 miles (161 000 km) for linehaul applications.
  2. For Detroit axles, complete this procedure once a year or at the following applicable interval, whichever comes first: every 5000 miles (8000 km) for Schedule I vehicles; or every 100,000 miles (161 000 km) for Schedule II vehicles.
  3. For Detroit axles, complete this procedure once a year or at the following applicable interval, whichever comes first: every 5000 miles (8000 km) for Schedule I vehicles; or every 100,000 miles (161 000 km) for Schedule II vehicles.
  4. The automatic drain valve should be inspected every 6 months or 1500 operating hours, whichever comes first.

Table 1, Lubrication and Fluid Level Check for Service Schedules I and II

Note:
Parent topic: General Information
Document Number: 0000119832
Manual Publication Date: 2024-05-23
Topic Publication Date: 2024-10-31