Bendix AD-9si, AD-IS and CR Turbo 2000 Air Dryers

4700 mm 42.02.003
  1. Park the vehicle on a level surface, shut down the engine, and apply the parking brake. Chock the tires.
  2. Drain the air reservoirs.
  3. Using a strap wrench or equivalent, loosen the desiccant cartridge. See Fig.. Spin the cartridge off by hand and discard it.

    1. Desiccant Cartridge

    2. Cartridge Sealing Ring

    3. Threaded Base Post

    Fig. 1, Desiccant Cartridge Replacement

  4. On the new desiccant cartridge, lubricate the sealing rings with silicone grease.

    5. Important: Only use the silicone grease supplied with Bendix replacement kits.

  5. Screw the desiccant cartridge onto the body by hand until the seal makes contact with the body. Rotate the cartridge clockwise about one full turn. Tighten the cartridge firmly.
Note:
Parent topic: Bendix Air Dryer Desiccant Replacement
Document Number: 0000120989
Manual Publication Date: 2024-05-23
Topic Publication Date: 2024-10-31