Lubrication of the Drag Link

4700 mm 46.04.001
  1. Using a clean rag, wipe all dirt from both drag link grease fittings. See Fig..

    1. Grease Fitting at Pitman Arm

    2. Grease Fitting at Axle Steering Arm

    Fig. 1, Drag Link

  2. Using a pressure gun, apply clean grease at the grease fittings until old grease is forced out of the socket. Use multipurpose chassis grease NLGI Grade 2 (8% 12-hydroxy lithium stearate grease) or NLGI Grade 1 (6% 12-hydroxy lithium stearate grease); Grade 2 is preferred.
Note:
Parent topic: Steering
Document Number: 0000121024
Manual Publication Date: 2024-05-23
Topic Publication Date: 2024-10-31