Door Seal, Door Latch, Door Hinge, and Door Check Lubrication
Note: Light penetrating oils, such as WD–40, should not be used because they wash out beneficial factory-installed grease, and they evaporate.
Door Seals
Lightly coat the door seals with a lubricant that's safe for rubber.
Door Latches
Wipe old grease and dirt from all door latch assemblies, then apply liberal amounts of an approved grease to each moving joint; see Table.. Use an appropriate applicator that will not leave material behind.
Table 1, Approved Grease
|
Approved Grease |
||
|
Application |
Lubricant |
NLGI Grade |
|
Door Latches |
ConocoPhillips Triton® 460 |
1.5 |
|
Door Checks |
ConocoPhillips Megaplex® XD3 |
2 |
Table 1, Approved Grease
Door Hinges
Lubricate external hinges every six months. Wipe old grease and dirt from the hinge, then force an approved grease into the hinge components; see Table.. Use an appropriate applicator that will not leave material behind. Wipe off any excess grease.
Door Checks
Wipe old grease and dirt from door checks. Lubricate each moving joint of the door checks at installation and every six months thereafter, with an approved grease; see Table.. Use an appropriate applicator that will not leave material behind.