Checking the Power Steering Reservoir Fluid Level

sb mm 46.04.001
  1. Clean around the power steering reservoir dipstick (fill cap) with a clean rag, then remove the dipstick. See Fig..

    1. Power Steering Fluid Reservoir

    2. Steering Gear

    Fig. 1, Power Steering Reservoir

    2. Warning: Fill only with approved clean fluid. Do not mix fluid types. Any mixture or any unapproved fluid could lead to seal deterioration and leaks. Fluid leakage could cause loss of power steering assist, possibly resulting in personal injury and property damage.

  2. With the power steering fluid at operating temperature, check the fluid level on the dipstick. If below the "add" mark, add enough fluid to bring the level up to the full mark on the dipstick. See Table. for approved power steering fluid.
  3. Install the dipstick (fill cap) in the power steering reservoir.

    Table 1, Approved Power Steering Fluid

    Approved Power Steering Fluid

    Fluid Type

    Approved Fluid

    Automatic Transmission Fluid

    Dexron III or equivalent1

    1. Use the same lubricant when assembling parts as is used in the power steering system. See the Warning above.

    Table 1, Approved Power Steering Fluid

Note:
Parent topic: Steering
Document Number: 0000120366
Manual Publication Date: 2025-01-08
Topic Publication Date: 2024-11-18