Lubricating the Drag Link

sb mm 46.03.001
  1. Using a clean rag, wipe the dirt from both grease fittings on the drag link. See Fig..

    1. Grease Fitting

    2. Drag Link (pitman arm end shown)

    Fig. 1, Steering Drag Link Lubricating

  2. Using a pressure gun, apply multipurpose chassis grease at the grease fittings until old grease is forced out of the socket.

    Note: Use multipurpose chassis grease NLGI grade 1 (6% 12-hydroxy lithium stearate grease) or NLGI grade 2 (8% 12-hydroxy lithium stearate grease). The grade 2 chassis grease is preferred.
    Note:
    Parent topic: Steering
    Document Number: 0000120367
    Manual Publication Date: 2025-01-08
    Topic Publication Date: 2024-11-18