Specify a description of this form fill.
Specify a TechLane ID of this form fill.
Repair Order
New Form Fill
Dealer Code
Repair Order
Operation Code
Description
Form
User
Begin
Close
Collaborate
Specify the e-mail addresses of other users, one per line
Okay
Cancel
Your session has been submitted.
Your session has been saved.
Failed to submit your session.
Failed to save your session.
All of the information you filled out on this form will be permanently deleted.
Yes, delete my session data.
All of the information you filled out on this form will be permanently deleted.
Finalize and submit this form?
Hide or show technician note textbox.
Required Special Tools
Recommended Shop Tools
You may have invalid TechLane data. We recommend refreshing the page. If you continue to see this, please contact your administrator. Would you like us to refresh the page for you?
No form data to submit.
Failed to save your favorites change. Please try again later. If you continue to see this message. Please contact your administrator.
We are unable to create your session at this time. Please try refreshing your page. If you continue to see this error, please contact your administrator.
Chapter
Error saving form data. Try refreshing your page, and if the issue persists, please contact your administrator.
Motor Control Module
Motor Control Module - Gen 5 DD15 - Ops -
#7628
The MCM is located on the left-hand side of the engine
(see graphic below).
Fig. 1,
Motor Control Module
The MCM processes
the data received from the CPC, for example the position of the accelerator
pedal, engine brake, etc. The data is evaluated together with the
data from the sensors on the engine, such as coolant and fuel temperature,
and oil pressure. The data is then compared to the characteristic
maps or lines stored in the MCM. From this data, quantity and timing
of injection can be calculated.
Document Number: 0000009744
Manual Publication Date: 2025-08-26
Topic Publication Date: 2026-02-05
