Aftertreatment Control Module

Aftertreatment Control Module - Gen 5 DD15 - Ops - #7628

The ACM is located on the back side of the Aftertreatment System (ATS) (see graphic below).

Fig. 1, Aftertreatment Control Module

The ACM controls the aftertreatment functions. When a malfunction or other problem is detected, the system selects an appropriate response to deliver to the operator. The ACM uses the inputs from the sensors to control the ATS. The data is compared to the characteristic maps stored in the ACM.

Note:

Document Number: 0000009743

Manual Publication Date: 2024-01-03

Topic Publication Date: 2025-04-16