Installation of the Fuel Prefilter - Two-Filter System
Installation of the Fuel Prefilter - Two-Filter
System - Ops #3499
Install the fuel prefilter as follows:
Note: If
a filter service is being performed, replace all other filters before
priming.
- Install a new prefilter cap seal ring on to the prefilter cap.
- Snap new prefilter into the prefilter cap.
- Apply a thin coat of petroleum-based lithium grease to
the prefilter cap seal ring and the prefilter seals (1).
- Install the prefilter into the fuel filter module.
- Turn the cap counterclockwise until a click sound is made, then turn clockwise and hand-tighten.
- Torque prefilter cap to 55 to 60 N·m (41 to 44 ft·lb).
- Once all required filters have been changed, prime the fuel system.
Note: