Adding Fuel

Adding Fuel - Ops

When adding fuel, pay attention to the following:

Notice: To ensure maximum engine performance for GHG17 applications, always use Ultra-Low Sulfur Diesel Fuel (ULSD) with 15 PPM sulfur content or less, based on ASTM Standard D2622 test procedure. Higher sulfur levels will damage the engine Aftertreatment System (ATS).
Notice: To ensure maximum engine performance for EuroV applications, Ultra Low Sulfur Diesel fuel (ULSD) (15 PPM sulfur content maximum), based on ASTM Standard D 2622 test procedure is recommended. However, due to varying fuel quality in these markets, up to 50 ppm sulfur diesel fuel is acceptable for this application.
  • Add winter or summer grade fuel according to the season of the year.
  • Work in the cleanest conditions possible.
  • Prevent water from entering the fuel tank.

For further information, .

Note:
Parent topic: Fuel System Checks
Document Number: 0000022282
Manual Publication Date: 2024-01-05
Topic Publication Date: 2023-12-10