Stop Engine Override Switch
Stop Engine Override Switch
- Ops - DD5, EuroV
This feature allows the operator to override the automatic Stop Engine sequence.
This is done by pressing the Stop Engine Override Switch every 15 to 20 seconds to prevent engine shutdown from occurring.
Note: Continuously holding down the Stop Engine Override
Switch will not prevent the engine shutdown sequence. You must continue
to reset the automatic shutdown system by pressing the Stop Engine
Override Switch at intervals of approximately 15 to 20 seconds.
It takes 30 seconds from the time the automatic shutdown sequence begins until engine shutdown. Therefore, the operator must press the override switch just prior to engine shutdown and continue to do so until the vehicle can be brought to a stop in a safe location.
Note: