Mirrors
Power mirrors are standard on eM2 vehicles.
Outside mirrors are mounted on the door frame and are controlled with the driver side door switches as shown, see Fig..
Adjust the driver side mirror by pressing the mirror selector switch to the left and then using the directional arrow switch to move the mirror. Press the mirror selector switch to the right to use the directional arrow switch to move the passenger side mirror.
To heat the outside door mirrors and clear them of fog, frost, or ice, press the outboard part of the mirror heat switch on the door. An amber indicator light on the mirror heat switch illuminates when the mirror heat is on. The mirror heat automatically turns off after 20 minutes unless the ambient air temperature is less than 28°F (-2°C), at this temperature it cycles on and off in 20 minute increments.
-
Mirror Selector Switch
-
Mirror Directional Switch
-
Mirror Heat Switch
-
Passenger-Side Window Switch
-
Driver-Side Window Switch
-
Door Lock Switch