Eaton Automated Transmissions, General Description

P4 DM Ch17; CasGen5 DM Ch15

Eaton automated transmissions use shift selection software and electric clutch actuation; a clutch pedal is not needed to operate the vehicle. These transmissions use the multi-function stalk switch shown in Fig. to select mode, direction, neutral, low, and to make manual shifts. To know what gear the transmission is in, see the driver display. Forward shifts can be made either manually or automatically.

Note: See Table for a description of control functionality.

  • Rotate for drive (D), neutral (N), or reverse (R).

  • Short press for automatic mode or switch between available modes.

  • Long press for manual mode.

  • Pull for upshift (+) request.

  • Push for downshift (-) request.

Fig. 1, Automated/Automatic Transmission Shift Control

Note:
Parent topic: Eaton Automated Transmissions
Document Number: 0000111543
Manual Publication Date: 2024-05-03
Topic Publication Date: 2025-03-07